Georgia

8960 Highway 5 Building A
Douglasville, GA 30134

Phone: (770) 439-8336
Hours: 8:00 AM - 5:00 PM EST

Get a Quote

Reliable Building Solutions From the Ground Up

As Georgia’s application experts, we specialize in innovative flooring solutions that include elevated concrete, cellular concrete, underlayment, insulation, and sound mat installation. Streamline your building project by entrusting your flooring and insulation needs to the professionals at Structis.

Project Portfolio

The Hawkins

Scope:
Prepped seams with PW sealant
Installed Liquid Applied LM85
Added a 60-millimeter layer of Polyguard 650 membrane over the LM85
Topped it off with a drain mat and 2″ average 3000 PSI exterior pump mix, and sloped to drains with a broom finish

Westin Hotel – Duluth, GA

Contractor: Shell Mcelroy
Architect: Cooper Carey
Scope: We offered a perfect solution to a problem of a 9th floor area that was 2 1/4″ out of level on approximately 4000 s/f. The Contractor needed the floor to be leveled but the structural engineer had a weight tolerance of 12# per s/f. We were able to offer a solution by using Maxxon® Low Density Fill for all the deep fill areas and then topped and leveled the floor with Maxxon® Level-Crete.

South Davis Apartments

Contractor: Summit Contracting
Scope: 300 Unit apartment complex – R-19 fiberglass batting in the walls – R-19 fiberglass batting in the floors for sound attenuation

The Living Building at Georgia Tech University

Scope: Maxxon® Acousti-Mat® 3/4 Premium

Upton Apartments

Contractor: Fortune Johnson
Scope: 1” Maxxon® Gyp-Crete® 2000 Multifamily over Acousti-Mat® 3/8 Premium

Lumen Briarcliff

Contractor: Fortune Johnson
Scope: Waterproofed balconies: installed T-bar flashing and poured exterior mix concrete.

T3 West Midtown

Scope: 159,700 sq. ft. Maxxon® Acousti-Mat® 3/4 Premium Installed Throughout Floors 3-7 and Penthouse Level

Walton Corporate Office

Scope: 6,353 total square feet Aquafin® Vaportight Coat® SG3 capped with 1″ average Maxxon® Gyp-Crete® High Performance

Walton Street Renovation

Scope: 27,000 sq. ft. of Commercial Topping poured at an average depth of 1-1/4″

Rivet Hotel

Contractor: Character Build
Scope: 21,330 sq. ft. 2” Maxxon® Gyp-Crete® High Performance over dual sound mat system of Maxxon® Acousti-Mat 3/4, Maxxon® SBR, and Maxxon® Reinforcement Renovation of old building to a new hotel

505 Courtland Apartment

Contractor: CBG Builders
Scope: Pouring 1” Maxxon® Gyp-Crete® 2000 Multifamily over Maxxon® 1/4” Acousti-Mat® over prescient metal decking on 14 story high rise apartment building

The Mill

Contractor: Whaley Construction
Scope: 95,000 sq. ft. 11/2” Maxxon® Gyp-Crete® 2000 Multifamily over Maxxon® Acousti-Mat® 3/4 with Maxxon® Reinforcement

760 Ralph McGill Parcel B Hotel

Contractor: Brassfield Gorrie
Scope: 7,700 s/f Maxxon® Level-Crete poured at 5/8”-1 1/2” over concrete slab at 4000 psi

Testimonials

They were very timely and organized. The workers completed the job well and the crew was very professional, courteous, and communicative. Could not be more pleased.

FAQs About Our Services

What is cellular concrete?

Cellular concrete is a type of concrete that is made using Portland Cement, water, and a preformed foam. The foam is combined with the cement slurry using a static mixer. The resulting concrete is lightweight, very flowable, and stable with virtually no bleed water.

What is elevated concrete?

Elevated concrete is a 3,000 psi pump mix weighing 140 PCF that is poured by our Structis team using utilizing a hydraulic concrete pump and a 2” line hose.

Is spray foam, fiberglass, or cellulose better?

Spray foam, fiberglass, and cellulose are all great options for insulating a house or commercial building. But it’s important to know the differences between each type of insulation and, figure out what your structure needs before you request services from Structis:

  • Spray Foam Insulation – Ideal for applying around small gaps, crevices, and cracks, spray foam dries quickly and is the sturdiest, highest quality option for insulating a building.
  • Fiberglass Insulation – The most popular, affordable selection, fiberglass is a great choice to insulate any structure, but it doesn’t hold up nearly as long as spray foam.
  • Cellulose Insulation – Perfect for property owners that value safe, recycled, and environmentally-friendly materials, cellulose is a great option to insulate your home or building.
Is underlayment a necessity?

IIC and FIIC are measures of how soundproof a material is, but there’s a slight difference between the two terms. Impact Insulation Class (IIC) is the lab rating of a material’s sound resistance. Field Impact Insulation Class (FIIC) is a more accurate on-site test that takes the combined soundproofing materials into account. These measures are both based on how well the chosen material reduces impact noises like footfall, scraping, jumping, etc. With a higher IIC or FIIC (multifamily buildings want to be around 55 FIIC), there’s a higher level of acoustic insulation in a material, which means that sounds are significantly reduced.

Do sound mats reduce noise in multifamily homes?

IIC and FIIC are measures of how soundproof a material is, but there’s a slight difference between the two terms. Impact Insulation Class (IIC) is the lab rating of a material’s sound resistance. Field Impact Insulation Class (FIIC) is a more accurate on-site test that takes the combined soundproofing materials into account. These measures are both based on how well the chosen material reduces impact noises like footfall, scraping, jumping, etc. With a higher IIC or FIIC (multifamily buildings want to be around 55 FIIC), there’s a higher level of acoustic insulation in a material, which means that sounds are significantly reduced.

Get a Quote

The first step to exceptional services is getting in touch.

Home Contact